- Home
- >
- Products
- >
- Tungsten Carbide Bushings
- >
- High Quality Tungsten Carbide Shaft Sleeve For Machanical Using
High Quality Tungsten Carbide Shaft Sleeve For Machanical Using
Brand :LIHUA
Product origin :Zhuzhou ,China
Delivery time :25-30 working days
Supply capacity :15 Ton per Month
High Quality Tungsten Carbide Shaft Sleeve For Machanical Using
Advantages:
(1). Abrasive resistant, corrosion free, good compression property, the most wear-resistant bushing, heat resistance, low maintenance ;
(2). The hardness is 10 times of gold, 5 times of tool steel, 4 times of titanium, oil resistance, separate the harmful medium;
(3). No shape change, no twist when temperature is above 1000 °C or below 500 °C, long service life, the maximum height can reach 270mm;
The grade information for sintered carbide shaft sleeves
| Grade | Binder(Wt%) | Density(g/cm3) | Hardness(HRA) | TRS(over N/mm2) |
| YG6 | 6 | 14.8 | 90.0 | 1520 |
| YG6X | 6 | 14.9 | 91.0 | 1450 |
| YG6A | 6 | 14.9 | 92.0 | 1540 |
| YG8 | 8 | 14.7 | 89.5 | 1750 |
| YG12 | 12 | 14.2 | 88.0 | 1810 |
| YG15 | 15 | 14.0 | 87.0 | 2050 |
| YG20 | 20 | 13.5 | 85.5 | 2450 |
| YG25 | 25 | 12.1 | 84.0 | 2550 |
| Grade | Density(g/cm3) | T.R.S | Hardness | Performance & Application Recommended |
| YG6 | 14.9 | 2150 | 89.5 | Qualified for finish machining and semi-finished machining for the cast iron,non-ferrous metal alloy and unalloyed materials |
| YG6X | 14.9 | 1560 | 91 | Qualified for machining of chilled cast iron
|
| YG6A | 14.8 | 1580 | 91 | Alloy cast iron,refrectory steel,alloy steel.Also qualified for the machining of common cast iron. |
| YG8 | 14.7 | 2320 | 89.5 | High bending strength,wear resistance lower than YG6A,used for processing baldes,wear resistance parts etc. |
| YG11C | 14.4 | 2260 | 87.5 | Qualified for molding the drills for heavy-duty rock drill:detachable bits used for deep hole drilling,rock drill torlley,etc. |
| YG15 | 14.0 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance |
| YS2T | 14.5 | 2800 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut off tool and sick prick. |
| YL10.2 | 14.5 | 3400 | 92.5 | |
| YG20 | 14.6 | 2480 | 83.5 | Qualified for making dies with low impact such as punching watch parts,battery shells,small screw caps etc. |
