Wear Resistance Tungsten Bearing Sleeves

Brand :LIHUA

Product origin :Zhuzhou ,China

Delivery time :25-30 working days

Supply capacity :15 Ton per Month

Cheap Wear Resistance Tungsten Bearing Carbide Shaft Sleeves Factory Brands Abrasive resistant, corrosion free, good compression property, the most wear-resistant bushing, heat resistance, low maintenance ;

Wear Resistance Tungsten Bearing Sleeves Brands, Cheap Carbide Shaft Sleeves, Tungsten Bearing Sleeves Factory, Wear Resistance Bearing Sleeves Factory

Wear Resistance Tungsten Bearing Sleeves

Advantages:

(1). Abrasive resistant, corrosion free, good compression property, the most wear-resistant bushing, heat resistance, low maintenance ;

(2). The hardness is 10 times of gold, 5 times of tool steel, 4 times of titanium, oil resistance, separate the harmful medium;

(3). No shape change, no twist when temperature is above 1000 °C or below 500 °C, long service life, the maximum height can reach 270mm;

Wear Resistance Tungsten Bearing Sleeves Brands

The grade information for sintered carbide shaft sleeves

Grade	Binder(Wt%)	Density(g/cm3)	Hardness(HRA)	TRS(over N/mm2)
YG6	6	14.8	90.0	1520
YG6X	6	14.9	91.0	1450
YG6A	6	14.9	92.0	1540
YG8	8	14.7	89.5	1750
YG12	12	14.2	88.0	1810
YG15	15	14.0	87.0	2050
YG20	20	13.5	85.5	2450
YG25	25	12.1	84.0	2550

Grade	Density(g/cm3)	T.R.S	Hardness	Performance & Application Recommended
YG6	14.9	2150	89.5	Qualified for finish machining and semi-finished machining for the cast iron, non-ferrous metal alloy and unalloyed materials
YG6X	14.9	1560	91	Qualified for machining of chilled cast iron
YG6A	14.8	1580	91	Alloy cast iron, refrectory steel, alloy steel.Also qualified for the machining of common cast iron.
YG8	14.7	2320	89.5	High bending strength, wear resistance lower than YG6A, used for processing baldes, wear resistance parts etc.
YG11C	14.4	2260	87.5	Qualified for molding the drills for heavy-duty rock drill: detachable bits used for deep hole drilling, rock drill torlley, etc.
YG15	14.0	2500	87.5	Used for punch dies,stamping dies and wear resistance
YS2T	14.5	2800	92.5	Qualified for low speed rough machining, milling, titanium alloy and refractory alloy, especially for cut off tool and sick prick.
YL10.2	14.5	3400	92.5
YG20	14.6	2480	83.5	Qualified for making dies with low impact such as punching watch parts, battery shells, small screw caps etc.